联系电话：023-67631889 +86 13829297771
邮箱：sales@me-concepts.com jacky@me-concepts.com
023-67631889
重庆鸣泉智能装备科技有限公司
MECO SEAL中国区授权代理
Seals for ATEX Applications
MECO Seals Explosive Atmosphere Applications
ATEX is a set of European prevention standards to ensure equipment is safe to operate in potentially explosive environments. Meco seals can be engineered to meet specific ATEX requirements under Directive 2014/34/EU, providing reliable sealing solutions for hazardous applications. Seal models are chosen for best compatibility with the process and may include the:
AH Seal
EP Type 2
EP Type 3
Ask about other model designations based on these
Description
ATEX is a series of explosion prevention standards, codified in 2014/34/EU, to which equipment manufacturers must conform, in order to place machinery in service in Europe in potentially explosive environments. Compliance involves formal risk assessments and testing under process conditions. ATEX was mandated in 2003, after which time new machinery must be compliant. Upgrades or retrofits to machinery which was in service prior to 2004 must also be ATEX-compliant.
MECO Atex Seals
MECO seals can be furnished for certain explosive atmosphere applications under Zone 1/21 and 2/22 designations. For retrofit applications, where a new seal will be mounted on an older piece of machinery placed into service prior to adoption of the Atex directive, MECO offers seals specifically marked for ATEX service. For new machinery, equipment manufacturers can opt to purchase EX-marked and tested seals, or they may equip their new machines with a variety of unmarked MECO models, and then include the seals under the umbrella of their ATEX declaration for the completed machine.
Construction
The use of packing glands and other high-friction seals in ATEX service can create an uncontrolled heat source and many European processors require alternative seals which are ATEX-compliant. Some mechanical seals advertise ATEX compliance, but require a liquid barrier for cooling, which is usually unacceptable in dry bulk processing applications. MECO’s soft-face technology uses materials with high inherent lubricity, which run cooler than radial, constricting seals without the use of fluid lubricants.
Several MECO seal models are available with ATEX certification. Common to all are a risk assessment, thermal testing and documentation, combined with a variety of protective measures designed to eliminate ignition sources, control surface temperatures and isolate processes from the atmosphere.
Before leaving the factory, every EX-marked MECO seal is run-tested under simulated process conditions to document surface temperature in operation and ensure that run temperature falls within the required temperature class and safety margin. A thermal test certificate is furnished with each seal.
Applications
MECO can design seals for Equipment Group II, Categories 2 and 3 D and G (Zone 1/21 or 2/22), where process parameters will permit the seal to operate within prescribed temperature and pressure limits. These limits vary considerably according to machinery and process requirements, so each ATEX seal is individually designed, built and marked for a specific process. MECO does not manufacture seals for Category 1 (Zone 0/20) service.
Documentation
See the attachment above.
复制产品链接
长按图片保存/分享
询盘
重庆鸣泉智能装备科技有限公司 Woodex-MECO Industries
MECO SEAL中国区授权代理 战略合作伙伴
中国电池工业协会会员单位 Our Strategic Partner
销售热线： 023-67631889
联系人：周先生 +86 138 2929 7771
+86 191 2286 8759
邮箱：jacky@me-concepts.com sales@me-concepts.com
地址：重庆市两江新区绿地·保税中心1期6幢-14层
